User`s manual

Configuration
GFK-1742A Chapter 4 Configuration 4-9
4
Each CTL bit shown in the previous table can be configured to one of the values in the following
table
Table 4-6. Allowed Values for CTL Bits Tab
Local Logic Controlled IN9_D (Axis 4 +OT) Strobe2 Level (Axis4)
%Q bit Offset 57
IN9_A (Axis 1 +OT) IN10_D (Axis 4 -OT) %Q bit Offset 12
%Q bit Offset 72
IN10_A (Axis 1 -OT) IN11_D (Axis 4 Home Sw) %Q bit Offset 13
%Q bit Offset 73
IN11_A (Axis 1 Home Sw) Strobe1 Level (Axis1)
%Q bit Offset 14 FBSA* Write Bit 1
IN9_B (Axis 2 +OT) Strobe2 Level (Axis1)
%Q bit Offset 15 FBSA* Write Bit 2
IN10_B (Axis 2 -OT) Strobe1 Level (Axis2)
%Q bit Offset 24 FBSA* Write Bit 3
IN11_B (Axis 2 Home Sw) Strobe2 Level (Axis2)
%Q bit Offset 25 FBSA* Write Bit 4
IN9_C (Axis 3 +OT) Strobe1 Level (Axis3)
%Q bit Offset 40
Local Logic Active
Flag
IN10_C (Axis 3 -OT) Strobe2 Level (Axis3)
%Q bit Offset 41
IN11_C (Axis 3 Home Sw) Strobe1 Level (Axis4)
%Q bit Offset 56
* FBSA is an acronym for “Fast Backplane Status Access” (Service Request #46). See GFK-
0467L or later for details.
Output Bits
The Output bits configuration tab allows the user to configure the DSM314 faceplate digital
outputs for either Local Logic program control or PLC program control. Output Bit parameters are
described in Table 4-7. Reference Chapter 14 for additional information concerning Output bit
configuration.
Table 4-7. Output Bits Tab
Configuration
Parameter
Description
Values VersaPro
Defaults
Ref
Out1_A Config Out1_A Control Source
PLC Control (%Q bit Offset 24)
DSM Control (Digital Output1_1)
PLC Control
Chapter14
Out3_A Config Out3_A Control Source
PLC Control (%Q bit Offset 25)
DSM Control (Digital Output3_1)
PLC Control
Chapter14
Out1_B Config Out1_B Control Source
PLC Control (%Q bit Offset 40)
DSM Control (Digital Output1_2)
PLC Control
Chapter14
Out3_B Config Out3_B Control Source
PLC Control (%Q bit Offset 41)
DSM Control (Digital Output3_2)
PLC Control
Chapter14
Out1_C Config Out1_C Control Source
PLC Control (%Q bit Offset 56)
DSM Control (Digital Output1_3)
PLC Control
Chapter14
Out3_C Config Out3_C Control Source
PLC Control (%Q bit Offset 57)
DSM Control (Digital Output3_3)
PLC Control
Chapter14
Out1_D Config Out1_D Control Source
PLC Control (%Q bit Offset 72)
DSM Control (Digital Output1_4)
PLC Control
Chapter14
Out3_D Config Out3_D Control Source PLC Control (%Q bit Offset 73)
DSM Control (Digital Output3_4)
PLC Control Chapter14