User`s manual

3-46 Motion Mate™ DSM314 for Series 90™-30 PLCs User's Manual – January 2001 GFK-1742A
3
+5v Power
Circuit
Identifier
Servo Axis Circuit
Function
Aux Axis
Circuit Function
Signal Name
(X = A, B, C, or D
Connector)
Faceplate
Pin
Auxiliary
Terminal
Board
Servo
Terminal
Board
P5V 5v Power 5v Power P5V_X 4 4 3
0V 0v 0v 0V_X 22 22 11
I/O Type: +5V Encoder Power
Circuit Type: +5V Power with Electronic Short Circuit Protection
Output Voltage: 4.70 v to 5.20 v at 0.5 amp
Output Current: 0.5 amp max (total for all connectors)
Notes: This output is intended to power external devices such as
Incremental Quadrature Encoders requiring less than 0.5 amps total
from all 4 axis connectors. The output current is provided by the
PLC backplane +5v supply and is protected by an electronic short
circuit protector in the DSM314 module.
The total external device current drawn from this +5V circuit must
be added to the power supply consumption value in the DSM314
configuration screen in VersaPro, and must be added in if
performing a manual power supply loading calculation.
The listed 0v pin should normally be used as the power return
signal.