User`s manual

Installation and Wiring
GFK-1742A Chapter 3 Installing and Wiring the DSM314 3-43
3
Optically Isolated Enable Relay Output
Circuit
Identifier
Digital Servo Axis 1,
2 Circuit Function
Analog Servo Axis
1-4 Circuit
Function
Aux Axis 2-4
Circuit Function
Signal Name
(X = A, B, C, or
D Connector)
Faceplate
Pin
Auxiliary
Terminal
Board
Servo
Terminal
Board
ENBL Servo MCON (+) Drive Enable (+) Drive Enable (+) ENBL1_X 15 15 N/C
Servo MCON 0v Drive Enable (-) Drive Enable (-) ENBL2_X 33 33 N/C
I/O Type: Optically Isolated Enable Relay Output
Circuit Type: Isolated AC Solid State Relay (SSR)
Output Current: 30 ma continuous, 50 ma for 10 ms
Output Voltage Drop: 1.0 v max at 10 ma
Notes: This is a low current SSR output. The output is ON when the
associated faceplate Axis Enabled LED is illuminated. This occurs
when:
•
The servo is enabled
•
A
Force Digital Servo Velocity
%AQ Cmd is used (Axis 1, 2)
•
A
Force Analog Output
%AQ Cmd is used
SOLID STATE
RELAY
EN +
EN -