User manual

Operating elements
ON/OFF power switch
The reflow controller can be switched on and off using the power switch. We recom-
mend that you end the current soldering process before switching off the power, or
alternatively, interrupt it using the STOP button
START button
Starts the soldering process. When the controller is first started, START initiates the
learn function for the oven.
STOP button
Interrupts the current soldering process.
OK button
Confirms previous settings and also brings you to the settings menu.
UP button
Increases setting values and also brings you to the previous item in a menu.
DOWN button
Decreases setting values and also brings you to the next item in a menu.
RIGHT button
Selects the next element at the same menu level.
LEFT button
Selects the previous element at the same menu level.
Display elements
Control LEDs
The LEDs display the data traffic on a connected PC. If no PC is connected, the LEDs
are not significant.
Display
The display shows all relevant information regarding your reflow controller. It is structured
as follows:
Reflow Controller V3 PRO
Operating Instructions
Page 8 of 39
STATUS N xxxC
PHASE yyyS
Current status
Number of active
parameter sets
Temperature
Measurement unit
Temperature
Measurement unit
Time
Time elapsed
Current phase