User manual

Intended Use
This product can only be used to control a reflow soldering oven.
Using it for any purpose other than the above will lead to product
damage, and inappropriate use is also associated with hazards such as
short circuits, fire, electric shock etc. The product must not be changed
or modified in any way.
This product complies with all legal, national and European requirements.
All company names and product designs are trademarks of the respec-
tive owners. All rights reserved.
Please refer to the controller operating manual, which is available for
download as a pdf in the relevant product category on
www.beta-eSTORE.com/RKCV3
Reflow Controller V3 PRO
Safety instructions
Safety Instructions
Any damage caused by failure to follow the opera-
ting instructions will render the guarantee/warranty
null and void. We accept no liability for consequential
damages. We also accept no liability for material or
personal damages caused by inappropriate handling or
failure to follow the safety instructions. In such cases,
the warranty/guarantee is null and void.
• For safety and licensing reasons, unauthorised
reconfiguration or modification of the product is not
permitted. Never disassemble the product.
• The product is designed for operation through the public mains supply
only (230V~/50Hz) and must be properly earthed. Plug the controller
into a regulation-compliant earth socket.
• This product is not a toy and is not intended for use by children.
Operate and store the product out of children’s reach. Children may
attempt to insert objects into the openings of the unit, risking fatal
electric shock.
• The product is only suited to dry indoor areas and must not get damp
or wet. Never use the product outdoors or in damp or humid condi-
tions, and never handle it with damp or wet hands. This could lead to
fatal electric shock.
• The product must always be operated under supervision.
• Due to the risk of fire or explosion, the product should not be operated
in any environment that is or may be exposed to flammable gases,
fumes or types of dust.
• The product is intended for private use only and not for commercial
use.
• The product is only intended to regulate a soldering or reflow oven
and should not be connected to any other devices.
• The product only isolates one pole of the socket on the connection
cable from the mains. Even if the product is switched off, mains voltage
may still be present around the socket and the connected device.
• Do not use the product as a “circuit breaker” for the connected device.
• Before connecting the product to a PC, you must unplug it from the
mains socket.
• Handle the product with care as it can be damaged by impact or as a
result of falling from even low heights.
• Do not continue to use the product if the product housing gets dama-
ged. If it is still connected to the mains, do not touch it or any other
attached devices. First, break off the electrical circuit to which the
product is connected (switch off the automatic circuit breaker). You can
now unplug the attached device and remove the controller from the
mains socket. Then bring the product to a repair workshop or dispose
of it in an environmentally appropriate way.
• Dispose of packaging carefully as it could be dangerous in the hands
of children.
• If you are concerned about the functioning, operation or safety of the
product, consult a specialist. Do not work on the product yourself.
Disposal
The device must be disposed of at the end of its life
according to the appropriate legal guidelines.
Technical Data
Operating voltage: 230 V/AC 50 Hz (EU)
110 V/AC 60 Hz (USA)
Maximum power consumption: 1500 W
Fuse: 8A-T (EU)
15A-T (USA)
PC connection: USB