Installation Instructions

Quick Assembly Guide - BESV JS1
5
2.1.3 Set the quick release (QR)
Unscrew the nut and spring from the QR and
insert the QR stem from the left side of the bike.
Attention: The quick release handle should be
on the left side of bike.
2.1.4 Tighten the nut
Place the spring back in the QR stem and tighten the nut until you encounter resistance.
Then loosen 1/4 turn。
Note: The tapered end of the spring should be facing inward.
2.1.5 Tighten the nut
Lock the QR by pushing the handle upwards until parallel with fork. Turn the wheel and
verify the rotation is smooth