Quick Assembly Guide - BESV CF1 Quick Assembly Guide BESV CF1 CF1 V. 0.
Quick Assembly Guide - BESV CF1 Contents 1. 2. 3. What’s in the Box ......................................................................................................................................... 2 1.1 Main Box Contents .......................................................................................................................... 2 1.2 Accessary Box Contents ................................................................................................................
Quick Assembly Guide - BESV CF1 1. What’s in the Box 1.1 Main Box Contents 1. Main Bike Assembly 2. Accessary Box 3. Saddle/Seat Post Set 1.2 Accessary Box Contents 1. User Manual 2. Charger 3. Pedal 4.
Quick Assembly Guide - BESV CF1 2. Assembly Procedures 2.1 Stem and Handlebar 2.1.1 Loosen stem fixing screw Press button(a) on the side to open stem lever, and a loosen the screw(b) inside. b 2.1.2 Adjust stem height and orientation Adjust stem to proper height and face forward. Note: Stem should be inserted over minimum insert marking. 2.1.
Quick Assembly Guide - BESV CF1 2.1.4 Adjust handlebar Adjust handlebar to center of the stem and rotate to proper angle. 2.1.5 Closure stem lever Closure stem lever. If stem lever is loosen, adjust the screw on the stem, “+” to tighten, “-“ to loosen. Note : Lever closure min force 12 ~15kgf. Finish stem and handlebar assembly.
Quick Assembly Guide - BESV CF1 2.2 Pedal 2.2.1 Take out the pedal in the box. 2.2.2 Set up the right pedal. Assemble the pedal with marking “R” onto the right crank clockwise and tighten it. R 2.2.3 Set up the left pedal Assemble the other one with marking “L” onto the left crank counterclockwise and tighten it. Finish pedal assembly.
Quick Assembly Guide - BESV CF1 2.3 Seat Post and Saddle Set 2.3.1 Open seat clamp, make sure the slit on the shim is aligned to the slit on the frame, and then push the shim to bottom. 2.3.2 Insert seat post Note : Regardless of the minimum insert marking, seat post should be inserted at least 10cm. Min 10cm 2.3.3 Adjust saddle to proper height and face forward, then closure seat clamp. Finish seat post and saddle set assembly.
Quick Assembly Guide - BESV CF1 3. Checklist 3.1 Check the tire pressure is normal. 3.2 Check the function of the brakes, derailleur, and chain. 3.3 Check the function of the electric module and the battery power. Please refer to CF1 user manual. Finish BESV CF1 Quick Assembly.
