Owner's Manual

On/Off button/Wi-Fi toggle
This button has two functions:
-On/off function: To start
or stop the pump.
-Wi-Fi activation function:
For more information, please refer to Wi-Fi operation
instructions.
Time setting button
During the set-up operation, the display will flash.
Every time you push the set-up
button, the timer will decrease 1 hour. When you reach the desired time, don’t push any
buttons for 5
seconds. The display light will
stop flashing. The set-up is finished.
Wi-Fi indicate light
This LED indicates the status of the Wi-Fi connection. Check the Wi-Fi Indicator Light
Definitions section for the different statuses of this LED.
Important：
1. After setting the run time, the pump will restart automatically at the same time the
following day.
2.
In case of power outage or power cord loosening, the running time of the product will be
reset to a 10 hour default.
Filter cartridge status indicator
Filter indicator on:The filter element is dirty. Please replace/clean the filter cartridge.
Digital display
"- -"Standby status
, press the button show the run setting time.
Wi-Fi Indicator Light Definitions
Indicator Display Definition
WiFi indicator lights on
Connected to the router
WiFi indicator lights off
Light damaged / Wi-Fi module has problem
WiFi indicator flashes quickly
Lost Wi-Fi signal
WiFi indicator flashes slowly
Waiting to connect to the router
Caution: Wi-Fi indicator only indicates the state of connection between the pump and the
wireless router. When your Wi-Fi indicator lights up but the device in the app is offline,
please check whether your wireless router network is malfunctioning.