Assembly Instructions

STORAGE

Draining the Spa

REPAIR

For PVC part.

If the spa is torn or punctured, use the provided underwater adhesive

repair patch.

1. Clean area to be repaired.

2. Carefully peel patch.

3. Press patch over area to be repaired.

4. Wait 30 seconds before inflation.

DEFLATION

Detergent residues and dissolved solids from bathing suits and chemicals may build

up on the spa walls. Use soap and water to clean the walls and rinse thoroughly.

NOTE: DO NOT use hard brushes or abrasive cleaners.

Cleaning the spa

For Tritech PVC material.

If the spa is torn or punctured, use the provided PVC repair patch and glue

(not included) following these steps:

1. Clean and dry area to be repaired.

2. Cut the provided PVC patch to appropriate size.

3. Use glue (not included) to coat the one side of the newly cut patch. Make

sure the glue is evenly distributed.

4. Wait for 30 seconds and then place the cut patch with glue over the

damaged area.

5. Smooth out any bubbles of air that may be trapped underneath, and press

firmly for two minutes.

6. The product is once again ready for use. Repeat this process should

further leaks occur.

7. Wait 30 minutes before inflation.

Safety valve

P61727ASS18

Screw valve

P61726ASS18

P61727ASS18

2. 3. 4.

NOTE: Dry the spa pool.

NOTE: Lift up the spa when there is

only a little water left. Damages to

the handles are not covered under

the warranty.

P00217

303021213400_14.0x21.0cm_54124,54130,54149,54155,54176,54187,54190,54295,54297_美规AirJet SPA说明书_ႎ