Installation Manual

90024 pg 3
1004 Rev. A
Step Three
INSTALL TAILGATE BAR
From the back of the vehicle, hold the Duster with the backing side toward you. Orient the
Tailgate Bar with the rubber bulb facing down, in order to form a seal with the top of the
tailgate. Slide the groove in the Tailgate Bar onto the tube inside the rear of the Duster.
Roll the Tailgate Bar into the top of the Tailgate Retainer Mounts.
Web Strap
Buckle
Front Sport
Bar
Threading Strap
through Buckle
Buckle
Step Four
SECURE WEB STRAPS
Drape the fabric forward over the rear of the vehicle and locate the web straps, with
buckles attached, on the front of the Duster. Wrap the straps around the front sport bars
and thread the ends loosely through the buckles. Do not pull the straps tight at this time.
Note : This product is designed for a "Custom Fit".
Be patient during the installation, it fits tight!
Duster - Backing
side out
Strap
Step Two
SECURE REAR SEAT
Locate the Web Buckle Strap in the parts
kit. Thread the web end of the strap
through the footman loop closest to the
rear of the seat on the Driver’s side. Fold
the back of the seat down and thread the
web through the bar on the seat back.
Thread the end of the strap through the
buckle and pull it tight. Tightening the
strap securely will keep the seat from
banging when the vehicle is moving.
Detail of Tailgate Retainer
Tailgate Retainer
Mount
Tube on outside
of Duster
Tailgate Bar - Oriented
with Rubber Bulb Down
View from Rear
Web Buckle
Strap
Footman Loop
Seat Back
Seat Bottom