Installation Manual

Tri-Fold Tonneau Installation Instructions
Rev. 1 1109 XXXXX pg. 4
Pull down on the handle to release the rear clamp
on the driver’s side.
Push down on the saddle to release it from the
inner lip of the truck bed.
Slide clamp toward inside of bed.
Place clamp in horizontal storage position.
Repeat on the passenger side.
Driving with the Tonneau Open
Release Rear Clamps
Fold the Tonneau toward the front of the vehicle.
Driving with the Tonneau Open
Fold Tonneau Forward
Buckle one of the retaining straps to the front rail of the Tonneau.
Pull the end of the strap to tighten. Repeat with both retaining straps.
Driving with the Tonneau Open
Secure Retaining Straps
The buckle of each
retaining strap and
both clamps must be
fastened securely to avoid damage to property or
possible personal injury.