Installation Manual

Tri-Fold Tonneau Installation Instructions
Rev. 1 1109 XXXXX pg. 3
Make sure clamps are secure before
operating vehicle.
Slide the clamp to the end of the bow. Position the
notched section of the saddle under the inner lip of
the truck bed.
Position Front Clamp
Pull the handle up to secure the clamp.
Repeat Steps 3 – 5 on the passenger side.
Secure Front Clamp
Unbuckle the retaining straps – one buckle per
strap.
Unbuckle Retaining Straps
Lower the tailgate and unfold the Tonneau to cover
the bed.
Repeat Steps 3 – 5 to secure the rear clamps on
both sides of the vehicle.
Secure Tonneau