Installation Manual

ManualsBrandsBestop ManualsAutomotiveBestop 16113-01 EZ Fold Truck Tonneau Cover for 2004-2018 Ford F-150 Styleside Crew Cab/Super Cab (Except Heritage), 5.5' Bed

Installation Instructions

www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Truck Accessories by Bestop.

Installation Tips

Before you begin installing this assembly, read all instructions thoroughly.

Check and secure all clamps to bed frame as indicated in the installation instructions before

operating your vehicle.

Tonneau cover clamps must be securely attached prior to vehicle operation.

Secure retaining straps when cover is in open position.

INSTALLATION TIME

SKILL LEVEL

Less than 15 minutes

1 - Easy

TOOLS

Tri-Fold Folding Tonneau

Vehicle Application:

No Drilling in Truck Bed Required

Summary of content (5 pages)

PAGE 1
Installation Instructions Vehicle Application: Tri-Fold Folding Tonneau No Drilling in Truck Bed Required www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Truck Accessories by Bestop. INSTALLATION TIME SKILL LEVEL Less than 15 minutes 1 - Easy TOOLS Installation Tips Before you begin installing this assembly, read all instructions thoroughly.
PAGE 2
Tri-Fold Tonneau Installation Instructions Parts List Place Tonneau on Bed Place the Tonneau on the vehicle with the retaining straps facing up. Align the outside edge of the front rail with the outside edge of the bed. Center the Tonneau from side to side. Bow Mount, Part Number 728600, Qty - 8 Tonneau Cover, Qty - 1 Large Hinge, Part Number 728610.1, Qty - 2 Corner, Part Number 728605.
PAGE 3
Tri-Fold Tonneau Installation Instructions Secure Tonneau Position Front Clamp Slide the clamp to the end of the bow. Position the notched section of the saddle under the inner lip of the truck bed. Secure Front Clamp Pull the handle up to secure the clamp. Repeat Steps 3 – 5 on the passenger side. Lower the tailgate and unfold the Tonneau to cover the bed. Repeat Steps 3 – 5 to secure the rear clamps on both sides of the vehicle.
PAGE 4
Tri-Fold Tonneau Installation Instructions Driving with the Tonneau Open Release Rear Clamps Pull down on the handle to release the rear clamp on the driver’s side. Driving with the Tonneau Open Fold Tonneau Forward Fold the Tonneau toward the front of the vehicle. Push down on the saddle to release it from the inner lip of the truck bed. Slide clamp toward inside of bed. Place clamp in horizontal storage position. Repeat on the passenger side.
PAGE 5
Tri-Fold Tonneau Installation Instructions Care and Maintenance of your Bestop Product Your Bestop product is made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning and maintenance. Washing: The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap or use Bestoprecommended Bestop Cleaner and Bestop Protectant.