User manual

BESTip ATA 10L User Manual
35
Appendix A: Specifications
Interface
Telephone Interface RJ-11 ports, 1 x FXS for phone set
LAN Interface
RJ-45 port, 10/100M Ethernet
2 LED, 100/10 and LINK/ACT
Display
16x2 lines LCD display
2 LED Power and ON LINE
Switch button 5 setup buttons
Voice Codec
Channel Capability 1 Channel
Voice Codecs G.723.1 6.3/5.3 Kbps
Silence Compression
VAD/CNG
G.723.1 Annex A
Echo Canceller G.168-2000 Compliant
Signaling
DTMF(TIA464B) Call
progress and user defined tone
pairs
Input/output Gain Programmable
Software/ Hardware
CPU
Embedded High Performance
100MHz 16-bit CPU
Memory 8Mb FLASH ROM, 16Mb SDRAM
DSP Chip Set
High Quality/Performance DSP for
Voice compression
Front Control Panel
16 characters x 2 Lines LCD,
5 Push Button Switches
BESTip ATA 10L User Manual
36
Operating System
Embedded Real-Time Operating
System
Networking Protocol
IP, TCP, UDP, DHCP, PPPoE, PAP,
CHAP, DNS
Front Panel
Self-Configuration
function
Configure BESTip ATA through front
panel. No additional software or
hardware required
Voice Over IP Gateway
Protocol
BESTip Gateway Protocols
Only 10k bps bandwidth is required
when using G.723.1 6.3K codec
Physical
Power 12VDC, 0.6A External Power Supply
Environmental
Operational : 0 to 45
o
C
Storage : -10 to 70
o
C
Humidity: 10 to 90% non-condensing
Dimensions 128 x 88 x 27 mm (W/D/H)
Weight 300 g Approx.
Note: Specifications may subject to change without prior notice.