User manual

BESTip ATA 11L User Manual
9
Chapter 2: Installation
This chapter will describe how to connect your BESTip ATA
11L.
Package Contents
The package of the BESTip includes the following:
 A BESTip ATA 11L
 An DC power adapter
 A R-J11 phone cord
 A R-J45 network cable
Requirements to Use BESTip
Before making an Internet call with your BESTip, you also need
the following items:
 1 touch-tone phone set (TONE mode)
 An 110/220V electrical outlet
 An active Internet connection (ADSL, Cable or others):
The following parameters must be known about the
network (LAN, WAN, Internet, etc.) to which the BSETip
will connect.
IP Address for BESTip
Gateway IP Address
IP Netmask
DNS (Domain Name Server)
IP Address
Note: Write down the values for these IP parameters. You may
need to enter these values in the following chapter.
BESTip ATA 11L User Manual
10
Physical Installation
Follow the instructions for correct connection:
1. Connect one end of an RJ-11 phone cord to the FXS
connector on the back of BESTip ATA 11L. Connect the
other end to the analog phone sets or C.O ports of the
PABX.
2. Connect one end of
3. Connect the provided network cable into the LAN port of
BESTip ATA 11L. Connect the other end of the cable to
your network eg. a router, hub or an ADSL modem.
4. Attach the DC power adapter cord into the power
connector of BESTip ATA 11L and a live power outlet.
Hookup for BESTip ATA 11L
Note: A crossover network cable may be required when connecting
to ADSL Modem.