User manual

BESTip ATA 11L User Manual
47
To Receive a BESTip Call
Once your BESTip is connected to the Internet, you may accept
the calls from other BESTip, or regular phone users. You
cannot receive calls only when you are in the BESTip Setup
mode. Please check again if every setup is working fine. Let me
know your device ID# as soon as possible so to ask our agent
to contact you very soon.
BESTip ATA 11L User Manual
48
Appendix A: Specifications
Interface
Telephone Interface 2 RJ11 port, 1 x FXS for phone set,
1 x FXO for land line
LAN Interface
RJ-45 port, 10/100M Ethernet
2 LED, 100/10 and LINK/ACT
Display
16x2 lines LCD display
2 LED Power and ON LINE
Switch button 5 setup buttons
Voice Codec
Channel Capability 2 Channels
Voice Codecs G.723.1 6.3/5.3 Kbps
Silence Compression
VAD/CNG
G.723.1 Annex A
Echo Canceller G.168-2000 Compliant
Signaling
DTMF(TIA464B), Call
progress and user defined tone pairs
Input/output Gain Programmable
Software/ Hardware
CPU
Embedded High Performance
100MHz 16-bit CPU
Memory 8Mb FLASH ROM, 16Mb SDRAM
DSP Chip Set
High Quality/Performance DSP for
Voice compression
Front Control Panel 16 characters x 2 Lines LCD,