User manual

BESTip ATA 11L User Manual
41
1. Press button to enter the
Function Select Mode.
2. Press or button to
scroll the main menu till it appears
Function Select - System Upgrade.
And then press to enter the
option.
3. Press to start the
upgrading process.
4. BESTip will proceed to connect to
the download Server and the screen
will show the downloading process.
5. It will take about 3~5 minutes to
finish downloading depending on the
network traffic. If the new software
version is downloaded successfully,
BESTip will reboot itself automatically.
Please do not power off the device any time during software upgrade is
in progress, otherwise the device may not boot properly.
BESTip ATA 11L User Manual
42
Chapter 4: To Make an Internet Call
After having finished the setup in Chapter 3, you are ready to
operate your BESTip. Refer to the illustration below to connect
your BESTip with other devices.
Over Internet or TCP/IP networks, BESTip provides two modes
of voice communication: BESTip-to-BESTip and
BESTip-to-Phone modes. It allows BESTip users to save
greatly on long-distance and international call charges.
Hookup for BESTip ATA 11L
Testing Before Making a Call
After finishing the connection and configuration of your BESTip,
be sure the BESTip is turned on and well connected. You must
allow the BESTip to finish booting before operating.
1. BESTip will start self-testing, and
the LCD screen will display as shown
right.