User manual

BESTip ATA 10D User Manual
11
Chapter 3: Setup
After connecting the device, follow the steps below to setup the
BESTip ATA 10D. You can modify the setting when the device
is at working status.
Make sure the device is well connected. Please do not enter the
setup mode until the device finishs booting.
How to Enter Setup Mode
1.
A
fter finishing the connection, the
BESTip will start self-testing, and
the LCD screen will display as
shown right.
2. After the system finishing
initializing, the system will start up
DSP.
3. For the first time, the LCD will
display Enter Setup Mode - Push
Down=Yes. Press button
on the front panel to enter setup
mode.
Note: When the device finishes booting, you can always use
or to scroll the menu and press
to enter the option you select.
BESTip ATA 10D User Manual
12
1. You can press “DOWN” button at standby status to enter main
menu.
2. Then, you can press “NEXT” or “BACK” button to scroll the menu.
Press “Down” button
to enter main menu.
Press “NEXT” button
to scroll the menu.
Press “BACK” button
to scroll the menu.