User manual

BESTip ATA 10D User Manual
9
Chapter 2: Installation
This chapter indicates how to proprely connect your BESTip ATA 10D.
Package Contents
The package includes the following items:
 A BESTip ATA 10D
 A DC power adapter
 A R-J11 phone cord
Requirements to Use BESTip
Before making an Internet call with your BESTip, you also need
the following items:
 A touch-tone phone set
 A 110/220V AC electrical outlet
 A valid Internet account
 An analog phone line
Note: If you do not have a dial-up Internet account, please
contact your local ISP.
BESTip ATA 10D User Manual
10
Physical Installation
Follow the instructions for correct connection:
1. Unplug the phone from the wall-jack, and plug it into the
RJ-11 jack labeled FXS PHONE on the back of BESTip.
2. Plug one end of the phone cord into the wall phone jack.
3. Plug the loose end of the cord into the R-J11 jack labeled
LINE on the BESTip.
4. Attach the DC power adapter cord into the power connector
of BESTip ATA 10D and a live power outlet.
Hookup for BESTip ATA 10D