User manual

BESTip ATA 10D User Manual

To upgrade your BESTip with the latest software version, follow

the followign instructions. The process will take 5 minutes or so

depending on the Internet traffic.

1. Press button to enter the

Function Select Mode. Press

or to scroll the main menu

till it appears System Upgrade. And

then press to enter the

option.

2. Press to start the the

process of software upgrade.

3. Press to confirm the

process.

4. BESTip ATA 10D will dial ISP

automatically and connect to Internet.

5. Once Internet Connection is

established, BESTip ATA 10D will

connect to the Server and the screen

will show the downloading progress.

6. It will take about 3~5 minutes to

finish downloading depending on the

network traffic. If the new software

version is downloaded successfully,

BESTip will reboot itself automatically.

Please do not power off the device any time during software

upgrad is in progress, otherwise the device may not boot properly.

BESTip ATA 10D User Manual

Chapter 4: To Make an Internet Call

After having finished the setup in Chapter 3, you are ready to

make calls with your BESTip. Refer to the illustration below the

connection of your BESTip.

BESTip provides two modes of voice communication:

BESTip-to-Phone and BESTip-to-BESTip modes. Both allows

users to save greatly on long-distance and international calls.

Hookup for BESTip ATA 10D

Note: A crossover network cable may be required when

connecting to ADSL Modem.

Testing Before Making a Call

After finishing the connection and configuration of your BESTip,

be sure the BESTip is turned on and well connected. Please

wait till BESTip finishes booting before making calls.

1. BESTip will start self-testing, and

the LCD screen will display as shown

right.