User manual

BESTip ATA Combo User Manual
47
To Receive a BESTip Call
Once your BESTip is connected to the Internet, you may accept
the calls from other BESTip devices. You cannot receive calls
only when you are in the BESTip Setup mode.
BESTip ATA Combo User Manual
48
Appendix A: Specifications
Interface
Telephone Interface RJ-11 ports, 1x FXS for phone set
LAN Interface
RJ-45 port, 10/100M Ethernet
2 LED, 100/10 and LINK/ACT
Line Interface
RJ-11 port, FXO for bulit-in 33.6K
modem
Display
16x2 lines LCD display
2 LED Power and ON LINE
Switch button 5 setup buttons
Voice Codec
Channel Capability 1 Channel
Voice Codecs ITU-T G.723.1 6.3 Kbps
Silence Compression
VAD/CNG
ITU-T G.723 Annex A
Echo Canceller ITU-T G.168-2000 Compliant
Signaling
DTMF(TIA464B),
Call progress and user defined
tone pairs
Input/output Gain Programmable
Software/ Hardware
CPU
Embedded High Performance
100MHz 16-bit CPU
Memory 8Mb FLASH ROM, 16Mb SDRAM
DSP Chip Set
High Quality/Performance DSP for
Voice compression