User manual

BESTip ATA Combo User Manual
41
Function Select－Factory Setting (Broadband Mode)
BESTip has the auto-recovery capability. Just follow the steps
below to restore the factory settings.
Note: Before proceeding to restoring, be sure that your BESTip
is connected to the Internet.
1. Press button to enter the
Function Select mode.
2. Press or button to
scroll the main menu till it appears
Function Select - Factory Setting.
And then press to enter the
option.
3. There are one option of Factory
Setting: CLEAR SYS SETUP.
Press to start the process.
4. Press to clear system
setup.
Function Select－System Upgrade (Broadband Mode)
To ensure the users to always have the latest Internet
telephony technologies, the BESTip has the online upgrade
feature.
You can upgrade your BESTip whenever a new software
version becomes available. Upgrades can enhance the
performance and add more features to your BESTip.
Note: Before proceeding to upgrade, be sure that your BESTip
is connected to the Internet.
To upgrade your BESTip with the newest software version,
follow the followign instructions. The upgrade process will only
take about 3~5 minutes depending on the Internet traffic.
BESTip ATA Combo User Manual
42
1. Press button to enter the
Function Select Mode.
2. Press or button to
scroll the main menu till it appears
Function Select - System Upgrade.
And then press to enter the
option.
3. Press to start the
upgrading process.
4. BESTip will proceed to connect to
the download Server and the screen
will show the downloading process.
5. It will take about 3~5 minutes to
finish downloading depending on the
network traffic. If the new software
version is downloaded successfully,
BESTip will reboot itself automatically.
Please do not power off the device any time during software upgrade is
in progress, otherwise the device may not boot properly.