User manual

BESTip ATA Combo User Manual
25
3. Area Code: Please enter the
local Area Code.
4. IDD Prefix: Please enter the
International Direct Dial code.
5. 2nd IDD Prefix: Please enter the
secondary International Direct Dial
code. Leave it blank unless you are
in USA.
6. DDD Prefix: Please key in the
Domestic Direct Dial code.
7. Play Volume: The default value
is 0dB.You can adjust from -31dB
to 31dB.
8. Record Volume: The default
value is 0dB. You can adjust from
-31dB to 31dB.
9. Gatekeeper Type: “AUTO” for
most cases.
10. Modem Commands: Normally
leave it blank.
11. Modem Country: You can
enter the country where the modem
is located. “Taiwan” for example.
12. PPP Echo CTRL: Normally set
to “OFF”.
BESTip ATA Combo User Manual
26
13. Show CDR: CDR will be shown
on the display after call finished if
you turn it on.
14. Polarity Reverse: Normally set
to “OFF” unless your device is
applied for business purpose.
16. LCD Contrast: The default
value is 0dB. You can adjust from
+5~-10
Function Select－User Profile (Dial-Up Mode)
1. Press button to enter the
Function Select Mode.
Press or to scroll
the menu till it appears User Profile.
Press to enter the option.
2. There are four options in the User Profile menu: New,
Modify, Select and Erase.
User Profile－New
1. Press or to
scroll the User Profile menu till it
appears New. And then press
to enter the option.
2. Pick up your handset. Key in the
ISP name using the character
converter chart stated prior in this
chapter. Press to save.