User manual

BESTip ATA Combo User Manual
23
Function Select－Recharge Credit (Dial-Up Mode)
You may top up your ITSP account with recharge card. Please
ask local distributor for more detail.
1. Press button to enter the
Function Select Mode. Press
or to scroll the main menu
till it appears Recharge Credit.
2. Press to enter Recharge
Credit Go? Press again to
confirm.
3. BESTip ATA 10D will dial ISP
automatically and connect to Internet.
4. Once Internet Connection is
established, then Enter Card # will
show. Press one time, the
title will start flashing. Please enter the
card number. Press again,
and the title will stop flashing. New
value has been stored temporarily.
5. Press to enter Enter
PIN-CODE. Follow the same way as
in step 4 to enter the code.
6. Press button to confirm.
Start Recharge will show on the
display. The process will take a few
minutes.
8. When recharge finished, the total
amount will be shown on the display.
BESTip ATA Combo User Manual
24
Function Select－System Info (Dial-Up Mode)
You can always consult the system information of your ATA in
the System Info menu.
1. Press to enter the
Function Select Mode. Press
or to scroll the main menu till
it appears System Info. And then
press to enter the option.
There are two options in the System
Info menu: Device ID and Software
Version.
2. Device ID: Each ATA unit owns an
7-digits ID number. It is the number
for other BESTip users to reach you
over Internet. Please inform those
who use BESTip product your ID
number to call each other.
3. Software Version:It displays the
current firmware version of your
device.
Function Select－System Setting (Dial-Up Mode)
1. Press to enter the
Function Select Mode.
Press or to scroll
the main menu till it appears System
Setting. And then press to
enter the option.
2. Country Code:Please key in the
local Country Code.