User manual

BESTip ATA Combo User Manual
21
Function Select－Quick Setting (Dial-Up Mode)
You can always set the data of the device in the Quick Setting
menu.
1. Press to enter the
Function Select Mode. Press
button to enter Quick Setting.
2. PBX Dial Prefix: Please enter the
PABX dial prefix if the ATA is
connected to PBX.
3. ISP Phone: Please enter your
ISP phone number.
4. Login Name: Please enter your
loign name for dial-up Internet
access.
5. Password: Please enter your
login password for dial-up Internet
access.
6. PPP Type: Use or
to selcet the PPP type.
7. Primasy DNS: Set the primary
DNS if necessary.
8. Secondary DNS: Set the
secondary DNS if necessary
BESTip ATA Combo User Manual
22
9. ISP IdleTimeout : This mode
allows auto disconnection from the
Internet when no action detected
continues a period of time. 0 means
always online.
10. Country Code: Please enter
your country code.
11. Area Code: Please enter your
area code.
12. IDD Prefix: Please enter the
International Direct Dial code.
“00” for example.
13. DDD Prefix: Please key in the
Domestic Direct Dial code.
“0” for example.
14. Press to back to the
Quick Setting menu.
15. Press 1 or 2 times to
save configuration data in memory.
16. The standby screen will show
again after the configuration data has
been saved.