User manual

BESTip ATA Combo User Manual

9. After finishing all the settings, please press “UP” button one or two

times until the screen displays “Update Setup” as following picture. All

the setting will be saved permanently.

10. It will return to standby status automatically after the configuration

data has been saved. Please refer to the following chapters to setup

your BESTip ATA Combo.

Press “UP” button 1 or 2

times until the screen

displays “Update Setup”.

BESTip ATA Combo User Manual

Switch Between Broadband and Dial-up Mode

Before configuring your BESTip ATA Combo, you have to

switch between broadband or dial-up mode to fit your Internet

Connection.

1. Press button to enter the

Function Select Mode.

2. Press or button to

scroll the main menu till it appears

Function Select - System Setting.

And then press to enter the

option.

3. The first option is “Network Port”, it

is setup as “Ethernet” for broadband

by default.

4. You can changed to “modem” for

dial-up connection. Press

button and then or

to select between Ethernet or Modem.

Press again and to

next option.

5. Then, press button to

save the new setting in the memory.

6. Then please reboot the device by unplugging power adaptor

at rear panel and plug it again. After the device boots up, please

do follow up setting by referring to procedures at next pages.

Note: It is a good practice to restart the device if any setting had

been changed.