User`s manual

44
5.2.13.7 Update Firmware
Now press ESC and to enter the following figure. Update Firmware is to update firmware to the
latest version. But you should get the firmware first.
13-07. Adv Setup
Update Firmware
You can get the latest firmware version from ACARD by e-mail, or download it directly from the
web site: http://www.acard.com Then, unzip the file of .zip and copy it into a CD-RW. If the file
is .bin, you don’t need to unzip.
After placing the media into the DVD-ROM , press ENT. The system will begin searching the new
firmware and show the message on LCD as follows after it finds the new firmware. Then press
ENT to update.
Searching F/W ---
XXX/XXXX
13-08. Adv Setup
Compare Firmware
5.2.13.8 Compare Firmware
Now press ESC and to enter the following figure. Compare Firmware is to compare the current
firmware version and the newly downloaded version. It can prove if the downloaded version is the
newest one.
5.2.13.9 H/W Diagnostic
Now press ESC and to enter the following figure. H/W Diagnostic is to test the system
Press ENT to enter the next figure, and begin the LCD test. After that, the system will do the
button test, self-test of SDRAM, the hardware connection test and flash test. All test results will be
shown on LCD. It is the easiest way to know if the system can work well.
LCD Test Start
When all tests finishes, LCD will show the message as follows
Test finished
13-10. Adv Setup
Load Default
5.2.13.10 Load Default
Now press ESC and to enter the following figure. Load Default is to make all changed settings
return to defaults.
13-09. Adv Setup
H/W Diagnostic
ARS-2051PC/2074C/2078C Manual