User`s manual

41
5.2.12.20 Start Tray Eject
To set if do eject all tray after system boot up.
12-20. Setup
Start Tray Eject
The default is On. Press to select Off.
5.2.12.21 Disc Redetect
The function is designed specially for bad quality disc, the system will detect the disc one more
time if disc recognition error occurred.
12-21. Setup
Disc Redetect
The default is Off. Press to select On.
5.2.12.22 Show Burn Speed
Now press ESC and to enter the following figure. This function lets LCD shows the burning
speed of CD/DVD writers.
12-22. Setup
Show Burn Speed
The default is On. Press to select Off.
13. Adv Setup
5.2.13.1 UnderRun Protect
UnderRun Protect lets you control On and Off of Buffer Under Run Protection.
13-01. Adv Setup
UnderRun Protect
5.2.13 Adv Setup
Function#13 Adv Setup lets you change the system configuration. This function includes 22
subfunctions: UnderRun Protect, Overburn, Read Error Skip, Format HDD, Verify HDD, Burn-in,
Update Firmware, Compare Firmware, H/W Diagnostic, Load Default, CD+G, ISRC & MCN, USB
Option, CD-TEXT, Password, Disc Counter, Auto Save Image, Update Drive F/W, F1 Hotkey
Setup, F2 Hotkey Setup, Index and AutoRun Time. Refer to page 28 for the menu.
Under the first layer on function menu, press ESC for 2 seconds to enter Function#13-01 as the
following figure shows.
Press ENT to enter the following figure. UnderRun Protect lets you control On and Off of Buffer
Under Run Protection. The default is On. Press to select Off.
UnderRun Protect
On
ARS-2051PC/2074C/2078C Manual