User`s manual

36
5.2.10 Edit Track (for Audio CD only)
Function#10 Edit Track is exclusively designed for editing a collection of favorite songs from CDs.
In other words, you can collect songs on a number of CDs and merge them into a single CD.
There are 3 sub-functions: CD to CD, CD to HDD and Close Session. Refer to page 26 for the
menu.
10. Edit Track
5.2.10.1 CD to CD Edit
To select songs from source CD, and then burn into a blank CD-R/RWs.
10-01. Edit Track
CD to CD Edit
Enter into 10.-01 function, 1/10 means the number one of the 10 tracks, and 03:55 means the
length of track.
Select Track
1/10 03:55
You can press to see the rest of tracks. If you want to select the track, press ENT then a “+” will
shows up, press ENT again will cancel the selection.
Select Track
End 5Trk15:55
After selection, use ▲▼ move to the “End” which is between 1
st
track and last track.
Press ENT to end of selection, and use ▲ ▼ to confirm Yes or No.
Press ENT after burning, system will ask if you want to continue edit, use ▲ ▼ to confirm Yes or
No.
If you want to continue edit, the current source CD will be ejected and ask you to insert next disc.
Repeat the above process for editing.
Insert next disc
After editing, system will show ''Close all disc's session ? Yes”, use ▲ ▼ to confirm Yes or No.
Once session is closed, no more tracks can be added.
Close all disc's
Session ? Yes
Attention:
Commercial audio player might not able to play open session disc, close session is suggested for
max. compatibility.
5.2.10.2 CD to HDD Edit
To select tracks from single or multi-audio CD and create image to specific partition of HDD
10-02. Edit Track
CD to HDD Edit
ARS-2051PC/2074C/2078C Manual