User`s manual
35
9-07. Image P:A
Image Format Info
Press ENT to see the following figure. This figure shows that the hard disk has been formatted as
DVD.
Image Format Info
Auto
5.2.9.8 Edit
This function is to name a certain partition, but only when the partition contains an image file can
title editing be valid. First, select the function by pressing ▼.
First, select the function by pressing ▼.
9-08. Image P:A
Edit
Press ENT. A title should be composed of 1 to 13 characters. The character can be A, B, C, etc. or
1, 2, 3, etc. or the combination of both. Use ▲ ▼ to select the number or alphabet. After selecting
a desired one, press ENT.
Edit Title
?
5.2.9.9 Format HDD
Hard disk must be formatted by the system for the very first time. Hard disk will be partitioned into
the chosen partition format.
9-09. Image P:A
Format HDD
If no hard disk is installed, LCD will show the message as No Valid HDD!
All data on the hard drive will be erased after the hard disk format.
After the hard drive is formatted correctly, LCD will show “ Format HDD ok!.”, Press ENT to verify
HDD or press ▼ and choose No return back to menu.
5.2.9.10 LoadImage Method
This function is to change the way to save Image. There are 2 formats for choice: Auto and
Manual. Auto means system auto assign partition for loaded image. Manual let you to choose
which partition to load image to.
9-10. Image P:A
LoadImage Method
The default is Auto.
Press ENT, and use ▲ ▼ to confirm Auto or Manual.
Then press ENT to save the configuration.
ARS-2051PC/2074C/2078C Manual