User`s manual

Among the 13 functions, Function 10 Edit Track is designed exclusively for editing a collection of
favorite songs from CDs. During operation if you don’t understand an LCD message, see
Appendix A .
5.2.1 Copy
Function 1 Copy is copy functions allows instant copy of source (original disc/image) to the target
drives (burners). Before copying be sure that the source DVD is placed into DVD-ROM, or there
are data in a certain HDD partition if you have installed a hard drive. If you are not so sure of real
copying, use Function 2 Test to simulate first.
Select function 1. Put a source DVD into DVD-ROM and blank DVDs into the DVD writers. A
rewriteable DVD containing old data is also usable, but the old data will be automatically erased.
1. Copy
After the DVD-ROM and DVD writers detect DVDs, press ENT to start copying. LCD will show the
copying information as follows.
Copying-DVD 0%
4213.4MB 0:01
When copying is in progress, MB and time will decrease while the percentage of completion will
increase. “MB” means the size of data that you want to copy.
When copying comes to an end, LCD will show the results as follows. The passed DVDs will eject
automatically.
1. Copy
OK: 08
5.2.2 Test
Function 2 Test is simulation of duplication function, no data will be written to the media (CD-
R/DVD-R).
Select function 2. Put a source DVD into DVD-ROM and blank DVDs into the DVD writers. Only a
DVD-R disc supports this function.
2. Test
Press ENT to start simulation. If you use DVD rewriteable discs that contain data, the old data will
be quickly erased before simulation as shown below.
Erasing disc
29
LCD will show the testing information as follows.
When the test comes to an end, LCD will show the results as follows.
Testing-DVD 0%
4213.4MB 7:30
2. Test
OK: 08
ARS-2051PC/2074C/2078C Manual