User`s manual

22
Upon completion of data erasing, the following message will be displayed on the LCD.
Quick Erase
OK:01
5.1.8 Model Select
The function “Model Select” sets the operational mode of the copy controller. The 2051PC has two
operational modes: Flash Copier and DVD Copier (The default mode is Flash Copier.).
Press ENT to enter the following menu. Choose “Yes” to switch to the DVD Copier.
Press ENT and the system is now in the DVD Copier. The following menu will be shown on the
LCD.
1. Copy
Change Mode to
DVD Copier? Yes
8.Model Select
5.1.9 Setup
The “Setup” function changes the default settings. Once the settings are changed, they have to be
saved by pressing ENT. However, the default settings are recommended for the best
performances. This function has 9 subfunctions, including: Language, Burn Speed, Eject Disc,
Multi-session, Button Sound, Device Info, System Info, Update Firmware andCompare Firmware.
Please refer to the figure on Page 18 for detailed information.
Choose the ninth function, “Setup” as shown in the following figure.
5.1.9.1 Language
Now, press ENT to enter the following menu. This function can specify the language of the LCD
messages.
9-01. Setup
Language
Press ENT to enter the following menu. The default setting is English. You can change the display
language to Spanish, Japanese, Traditional Chinese and Simplified Chinese.
Language
English
9. Setup
5.1.9.2 Burn Speed
Now, press ESC and to enter the following menu. This function controls the burning speed of
the DVD burner.
9-02.Setup
Burn Speed
ARS-2051PC/2074C/2078C Manual