Installation Instructions

- 9 -
1. Push panel assembly back inside hood and secure to the hood using previously removed screws (see step 5).
2. Reinstall grease tray.
3. Insert one side of the filter into the side channel of the hood. Raise the other side toward the center of the hood and insert
in the grease drip rail.
12. REINSTALL PANEL ASSEMBLY, GREASE TRAY AND BAFFLE FILTERS
CAUTION
Remove protective plastic film covering filters before installing them.
11. INSTALL DECORATIVE FLUE COVER (OPTIONAL)
AEWPD Series
Refer to the instructions included with the optional decorative flue.
WARNING
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of
personal injury, only install shielded halogen lamps. Also, never install a cool beam, a dichroïc lamp, a
lamp not suitable for use in recessed luminaires or identified for use in enclosed fixtures.
!
1. To remove lamps, gently push upwards and turn
counterclockwise to disengage bulb leads from their grooves.
NOTE: To ease removal of the bulbs, use a rubber dishwashing
glove or use suction cup tool available from Best.
Contact Best Customer Service at 1-800-558-1711 to
order suction cup tool, part no. 99526707.
2. Install the new lamps by placing the bulb leads into their
grooves in the socket.
3. Gently push upwards and turn clockwise until secure.
12 3
HO0199
13. LIGHT BULBS REPLACEMENT
This hood requires 120 V, 50 W, MR16 with GU10 base, shielded halogen lamps (included). (2 for 36” width hood, 3 for 48” and
60” width hoods.)
14. CARE
Baffle Filters
The baffle filters should be cleaned frequently. Use a warm detergent solution. Wash more often if your cooking style generates
greater grease like frying foods or wok cooking.
Remove baffle filters by pushing them towards the side of the hood and rotating filters downward. Baffle filters are dishwasher
safe. Allow filters to dry completely before reinstalling them in the hood.
Clean all-metal filters in the dishwasher using a non-phosphate detergent. Discoloration of the filter may occur if using
phosphate detergent or as a result of local water conditions—but this will not affect filter performance. This discoloration is not
covered by the warranty.
Grease Tray
The grease tray should be emptied and cleaned frequently.
Remove from hood (as illustrated at right) and use a warm
detergent solution. Wash more often if your cooking style
generates greater grease like frying foods or wok cooking. Allow
grease tray to dry completely before reinstalling it in the hood.
1
2
HD0481