Spec Sheet

SPECIFICATION SHEET
BEST Drummondville, QC, Canada www.BestRangeHoods.ca 866-737-7770
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
HB0169
WALL EXTENSION (optional)
•
Extends front of hood out an extra 3” (to 30”) - eliminates
custom wall bump-outs.
•
Stainless Steel construction - matches range hood.
•
Attaches to wall and back of range hood.
Model AWWPD336SB - 36-in. width
Model AWWPD342SB - 42-in. width
Model AWWPD348SB - 48-in. width
Model AWWPD360SB - 60-in. width
FLUE COVER (optional)
•
Stainless Steel construction - matches range hood.
•
Attaches to top of range hood shell.
•
Hides ducting and wipes clean easily.
•
Extended depth available for hoods using the 3” wall extension.
Model AEWPD36SB - 6-in. high - for 8-ft. ceiling - standard depth
Model AEWPD36SBE - 6-in. high - for 8-ft. ceiling - extended depth
Model AEWPD318SB - 18-in. high - for 9-ft. ceiling - standard depth
Model AEWPD318SBE - 18-in. high - for 9-ft. ceiling - extended depth
Model AEWPD330SB - 30-in. high - for 10-ft. ceiling - standard depth
Model AEWPD330SBE - 30-in. high - for 10-ft. ceiling - extended depth
Model AEWPD3054SB - collapsed height: 30” - maximum height 54” -
standard depth
Model AEWPD3054SBE - collapsed height: 30” - maximum height 54” -
extended depth
71K 99044959C
Especially designed to be installed outdoors
in a covered patio or lanai area. For use over
residential commercial-style cooking surfaces or
gas and electric grills. This unit is not for use with
a charcoal grill. A complete installation requires
several optional components. Refer to page 2 when
planning your installation.
FEATURES
•
Professional outdoor design.
•
27-inch depth handles heat and size of outdoor grills
(optional 3” wall extension to increase depth to 30”).
•
Brushed corrosion resistant 304 Stainless Steel.
•
Four widths: 36, 42, 48, and 60 inches.
•
Powerful, SuperPro 1200™ internal blower - tested to
assure operation in corrosive environments.
•
Bright halogen lighting (2 x 50 watts GU10 for 36-in. & 42-in.
hoods, 3 x 50 watts GU10 for 48-in. & 60-in. hoods) (bulbs
included).
•
4-speed rotary control - tested to assure operation in
corrosive environments.
•
304 Stainless Steel baffle filters - easily accessible and
dishwasher-safe.
•
Removable grease rail - easy to clean.
•
Heat Sentry™ detects excessive heat and adjusts
blower speed automatically.
•
UL and cUL listed for use in damp locations when
properly connected to a GFCI circuit.
MONARCH
WPD38
I SERIES
RANGE HOOD
SPECIFICATIONS
VOLTS HZ AMPS CFM SONES DUCT
120 60 9.0 MAX. 1160 11.0 10-in. ROUND
HVI-2100 CERTIFIED RATINGS comply with
new testing technologies and procedures
prescribed by the Home Ventilating Institute,
for off-the-shelf products, as they are available
to consumers. Product performance is rated at
0.1 in. static pressure, based on tests conducted
in a state-of-the-art test laboratory. Sones are a
measure of humanly-perceived loudness, based
on laboratory measurements.
PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
AIR FLOW PERFORMANCE
HG0075A
STATIC PRESSURE (IN. W.G.)
AIR FLOW RATE (CFM)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0 200 400 600 800 1000 1200 1400