Installation Instructions

8
12. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
HD0465
Reinstall grease drip rail. The illustration at right shows how to reinsert the grease drip rail into
the range hood.
CAUTION
Remove protective plastic film covering filters before installing them.
It is recommended to install side filters first
and finish with center one(s).
 Insert front end of the filter into the upper
channel of the hood.
 Raise the other end toward the inside of
hood and insert in the grease drip rail of
the hood.
1
HD0466
2
13. LIGHT BULBS REPLACEMENT
1. To remove bulbs, gently push upwards and turn counterclockwise to
disengage bulb leads from their grooves.
NOTE: To ease removal of the bulbs, use a rubber dishwashing glove or
use suction cup tool available from Best. Contact Best Customer
Service at 1-800-558-1711 to order suction cup tool, part
no. S99526707.
2. Install the new bulbs by placing the bulb leads into their grooves in the
socket.
3. Gently push upwards and turn clockwise until secure.
WARNING
!
Do not touch lamps during or soon after operation. Burns may occur. In order to prevent the risk of personal injury,
only install shielded halogen lamps. Also, never install a cool beam, a dichroic lamp, a lamp not suitable for use in
recessed luminaires or identified for use in enclosed fixtures.
12 3
HO0199
This range hood requires shielded halogen bulbs (120 V, 50 W, MR16 with GU10 base) included (2 for 36" and 42" width hoods, 3 for 48"
and 60" width hoods.)