User manual

- 8 -
INSTALL THE DUCTWORK
NOTE: To reduce the risk of fire, use only
metal ductwork.
1. Decide where the ductwork will run
between the hood and the outside.
2. A straight, short duct run will allow the hood
to perform most efficiently.
3. Long duct runs, elbows, and transitions will
reduce the performance of the hood. Use
as few of them as possible.
4. Install a roof or wall cap. Connect 10" round
metal ductwork to cap and work back
towards hood location. Use duct tape to seal
the joints between ductwork sections
(Fig.4).
24” TO 36” ABOVE
COOKING SURFACE
ROOF CAP
WALL
CAP
10” ROUND
ELBOW
HOOD
DECORATIVE
FLUE
10” ROUND DUCT
FIG.4