Installation manual

- 10 -
INSTALL FLUE MOUNTING
BRACKET
D
UCTED OR NON-DUCTED
1. Assemble the flue mounting bracket,
adjusting outside width as shown.
Fig. 10.
2. Carefully center the mounting bracket
directly over the range hood location.
3. Secure the bracket assembly to the
ceiling using (2) 4.8 x 38 mm mount-
ing screws and drywall anchors.
Fig. 11. Make sure the bracket is pushed
into the corner, tight against the wall
and centered over the hood.
FLUE MOUNTING BRACKET
7-11/16”
FIG. 10
3.9 x 6 mm FLAT HEAD
BRACKET SCREWS
FIG. 11
4.8x38mm
MOUNTING
SCREWS
DRYWALL ANCHORS
CENTERLINE
OF HOOD
HOODS
WITH FLUE