Spec sheet

REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
SPECIFICATION SHEET
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
MODELS P195P1M52SB6
& P195P1M70SB6
POWER PACK
SPECIFICATIONS
Mount power pack so bottom is 24” to 30” over cooking surface.
Custom metal liner may be required – contact local building authority.
51K 99045227B
Best quality design and craftsmanship in a unit that mounts
flush with the bottom of cabinets or in a custom hood that
uses 6-inch duct.
FEATURES
•
Italian design
•
Cabinet mount – custom applications
•
Finish: 430 Stainless Steel (0.050” thick)
•
Widths: 21-3/16”, 28-5/16”
•
6” round duct connector/back-draft damper
•
Convertible to recirculating mode with filter kit sold separately
•
Perimeter Aspiration
-
Decorative hinged panel
-
Higher velocity around perimeter
•
2-level halogen lighting (2 bulbs included. Type T3, 12 volt, 20 watts
max., G4 base)
•
Electronic, push button controls:
- 4 speeds
- 10-min. delay off
- 30-hr. filter clean indicator
- Lights
•
Pro 600 blower
•
Heat Sentry
TM
- automatically turns blower to high speed when
excess cooking heat is detected
•
For indoor use only
OPTIONS
•
Recirculating filters (AFCP195P52, AFCP195P70)
•
Stainless liner (L5230, L7036, L7048)
•
Ambient light panels (ALP30, ALP36, ALP48)
•
Remote control (ACR2)
•
Make-up air dampers (MD6T, MD8T, MD10T)
•
8” Transition (B08010849)
X = 19-1/2” for P195P1M52SB6
X = 26-5/8” for P195P1M70SB6
10-1/4”
Cut a hole
in the bottom
of the cabinet.
X
11-1/8”
10-1/8”
BACK
5”
21-3/16”, 28-5/16”
19-7/16”, 26-1/2”
10-5/8”
12-3/4”
C
L
6” DIA.
4-1/4”
11-1/8”, 18-1/4”
MOUNTING
DIMENSIONS
MODEL VOLTS CFM
(High /
Working Speed
SONES
(High /
Working Speed
AMPS
P195P1M52SB6 120 520 / 190 9.5 / 1.0 3.4
P195P1M70SB6 120 520 / 200 8.0 / 1.0 3.4
This product was tested by Broan-NuTone for airflow performance using the
ANSI/AMCA 210 Standard, which is equivalent to the Home Ventilating Institute
HVI 916 - Procedure for Air Flow Testing, and tested for sound performance
using the ANSI S12.51 Standard, which is equivalent to the Home Ventilating
Institute HVI 915 - Procedure for Loudness Rating of Residential Fan Products.