Application Guide

Broan Automatic Make-Up Air Damper Product Guide – 04-17-13 10
6.1 Applications with the LinkLogic™ Model (SMD* model)
 SmartSense® Whole-House Ventilation System with Damper
Make-up
Air Damper
Control Module
Broan
Smart-Sense
Ventilation Fan
Make-up Air Damper
SMD* installed in air return
duct of forced-air system
(normally closed)
Transformer
- The Damper works in sync with Broan’s SmartSense® whole-house ventilation
system. When any one or more of the SmartSense® exhaust fans turns on, the
Damper fully opens to allow fresh outdoor air into the home. When no SmartSense®
fans are operating, the Damper closes. SmartSense® utilizes LinkLogic™, so
communications between the fans and the Damper occurs over the home’s power
lines, and no additional control wiring between the Damper and fans is necessary.
6.2 Applications with the Direct-Wired Model (MD*T) model)
 Compatible BEST, NuTone, or Broan Range Hood with Damper
Transformer
Broan
Range Hood
Make-up Air Damper
MD*T installed in air return
duct of forced-air system
(normally closed)
‐ The Damper fully opens or closes based on a direct signal from a compatible
BEST or Broan range hood which is “MD-capable.” This signal is triggered by
the operation of the range hood, which is sent through a hard wired connection
between the two devices using a Broan-supplied transformer. Only those BEST,
NuTone, or Broan range hoods which are MD-capable may be used for this
application.