Model.IM33I45SP - BEST Range Hoods

- 8 -
The total weight of the hood is 40 lbs as supplied. Special structural considerations
must be made to ensure proper installation. The mounting brackets need to mount
to 2” nominal lumber. Hollow wall anchors should not be used at any time. Fig. 5.
ROUGH-IN DETAILS
ROUGH-IN ELECTRICAL
This hood is has a three prong plug. Incoming power should be located as shown
on the drawings above.
WARNING: Electrical wiring must be done by a qualified person in accor-
dance with all applicable codes and standards.
STRUCTURAL REQUIREMENTS
2 X 4 MINIMUM
FRAMING
INCOMING
POWER
LOCATION
MOUNTING
HOLES (5)
OUTLINE
OF HOOD
MOUNTING PLATE
6” DUCT
LOCATION
3-3/4” 3-3/4”
6-3/16”
7-1/4”
1-7/16”
FIG. 5