Specifications Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, QC, Canada www.BestRangeHoods.com 866-737-7770
IN-LINE BLOWERS
MODELS ILB9 & ILB11
Powerful yet quiet blowers - exhaust the cooking area
from a remote location.
FEATURES
BLOWER:
• Low RPM for quiet operation
• Resilient anti-vibration mounts
• Dynamically-balanced, galvanized steel, centrifugal
blower wheel for quiet, efficient performance
• Permanently lubricated, thermally protected motor
• Plug-in motor rated at 120 VAC
• Designed for continuous operation
• For indoor use only
HOUSING:
• Rugged galvanized steel
• 8-position mounting brackets for easy installation and
greater adaptability to various mounting requirements
• Automatic backdraft damper located within exhaust
duct connector
• Factory-shipped in horizontal discharge position
• May be converted to vertical discharge
• Suitable for kitchen installations
ACCESSORIES INCLUDED:
• 8-inch x 12-inch integrated duct connectors
• Two (2) 8-inch x 12-inch to 10-inch-round transitions
• Hanger kit - for additional installation flexibility
• Range hood rough-in kit with integrated 10-inch duct
connector
TYPICAL SPECIFICATION
In-Line Blower shall be Best Model ILB9, (ILB11).
Unit shall have galvanized steel housing. Housing to have
adjustable mounting brackets.
Blower to include hanger kit, two (2) 8-inch x 12-inch to 10-inch-
round transitions, 8-inch x 12-inch integrated duct connectors,
and a range hood rough-in kit with integrated 10-inch duct
connector.
Automatic backdraft damper to be located within exhaust duct
connector. Duct connectors, blower assembly and wiring plate
shall be adjustable for either horizontal or vertical installation.
Blower unit shall be removable from housing and will have a
galvanized steel, centrifugal-type blower wheel. Motor to be
permanently lubricated and mounted with resilient anti-vibration
mounts.
Air delivery shall be n o less than listed for each model. All air
ratings shall be certified by HVI. Units to be UL and cUL listed.
01B 99043710F
* Performance ratings include the addition of a 10” round transition
on inlet and outlet.
SPECIFICATIONS
Model Volts Hz Amps CFM Duct Weight
ILB9 120 60 3.0 700 (V) 8” x 12” * 75.8 lbs.
800 (H)
ILB11 120 60 5.0 1000 (V) 8” x 12” * 75.9 lbs.
1100 (H)
8” x 12”
DUCT CONNECTOR
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and
procedures prescribed by the Home Ventilating Institute, for off-the-shelf products,
as they are available to consumers. Product performance is rated at 0.1 in. static
pressure, based on tests conducted in a state-of-the-art test laboratory. Sones are
a measure of humanly-perceived loudness, based on laboratory measurements.