CPDI Specification Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
BEST Hartford, Wisconsin www.BestRangeHoods.com 800-558-1711
BEST Drummondville, Quebec www.BestRangeHoods.com 866-737-7770
*22-1/2”
*34-3/8”, *46-3/8”, *58-7/8”
2”
5-1/8”
12”
12”
6”
C
L
9-7/8” DIA.
3”
3”
1-1/4”
CPD I SERIES
HOOD LINER
All-in-one design includes liner, blower,
filtration,controls and lighting for easy
installation into custom canopy hoods.
Especially designed to be installed in outdoor
custom hood to be used over residential,
commercial-style cooking surfaces or gas/
electric grills. Not for use with a charcoal grill.
FEATURES
•
Cabinet mount - custom applications
•
Corrosion-resistant 304 Stainless Steel construction, #4
Brushed
•
Widths: 34-3/8”, 46-3/8”, 58-7/8”
•
Depth: 22-1/2”
•
10” round duct connector
•
Two-setting cooktop lighting (Uses 50W, GU10 halogen
lamps. Bulbs included. 2 lamps on 34-3/8” wide hood, 4
lamps on all other hood widths.)
•
Easily accessible, dishwasher safe stainless steel baffle
filters with handles
•
3-speed electronic blower control
•
Powerful 1200 CFM centrifugal blower with high-
efficiency motor
•
Heat Sentry
TM
- automatically turns blower to high speed
when excess cooking heat is detected
•
UL listed for use in damp location when properly
connected to GFCI circuit
SPECIFICATIONS
21H 99044955B
*
Add 1/16”
for rivet heads.
MODEL NO. VOLTS AMPS CFM / SONES CFM / SONES DUCT
(High Speed) (Low Speed)
CPDI362SB 120 7.1 1040/11.5 480/3.0 10" round
CPDI482SB 120 8.0 1040/11.5 480/3.0 10" round
CPDI602SB 120 8.0 1040/11.5 480/3.0 10" round
Mount at least 36” above cooking surface.
HVI-2100 CERTIFIED RATINGS
comply with new testing technologies
and procedures prescribed by the
Home Ventilating Institute, for off-the-
shelf products, as they are available to
consumers. Product performance is
rated at 0.1 in. static pressure, based
on tests conducted in a state-of-the-art
test laboratory. Sones are a measure
of humanly-perceived loudness, based
on laboratory measurements.