Specification Sheet

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
BEST Hartford, Wisconsin www.bestrangehoods.com 800-558-1711
BEST Drummondville, QC, Canada www.bestrangehoods.ca 866-737-7770
CP57IQ SERIES
RANGE HOODS
All-in-one design includes liner, blower,
filtration, controls, lighting, and damper for easy
installation into custom canopy hoods. Intended
for all residential applications, including
commercial-style cooking surfaces.
FEATURES
•
Cabinet mount - custom applications
•
Finish: 430 Stainless Steel no. 4 Brushed
•
Max blower airflow: 1500 CFM*
•
120 VAC, 60 Hz, 8.3 Amps
•
Widths: 34-3/8”, 46-3/8”, 52-3/8”, 58-3/8”, 64-3/8”
•
Depth: 19-1/4” ( 34-3/8” & 46-3/8” Widths only),
22-1/2” (All Widths except 34-3/8”)
•
10” round duct connector with backdraft damper
•
1-level LED lighting (2 LED modules - 34-3/8” &
46-3/8” Widths, 4 LED modules - 52-3/8”, 58-3/8” &
64-3/8” Widths) 6 Watts max., 3000 K nominal
•
Easily accessible, dishwasher safe stainless steel
hybrid filters with handles
•
4-speed electronic blower control
•
Quiet iQ12 blower system with high efficiency BLDC
motor
•
Heat Sentry
TM
- automatically turns blower to high speed
when excess cooking heat is detected
•
Delay timer control automatically shuts off range hood
after 10 minutes
•
Special control indicates when it’s time to clean the filter
•
For indoor use only
•
Remote control (optional) (Model ACR3)
•
Universal Make-Up Air Damper (optional) (Models
MD6TU, MD8TU, MD10TU)
02H 99045199F
*19¼, **22½
34/
8
, 46/
8
52
/
8
, 58
/
8
, 64/
8
C
L
11
5

/
8
4½
,
5

/
8
7/8
7/8
12
3
3
iQ12 - 1200 CFM Blower System
providing:
•
Best in class quiet operation.
•
Up to 30% faster smoke and odor
removal than comparable models.
•
Up to 22x more energy efficient than comparable models.
•
Guaranteed Performance System (GPS) technology
calibrates the hood system to every installation to provide
up to 30% more CFM than standard range hoods.
•
Using a duct reducer with this hood may prevent the product
from calibrating.
* 19-1/4” Depth available in 34-3/8” & 46-3/8” widths only.
** 22-1/2” Depth available in all widths except 34-3/8”.
NOTE: D
IMENSIONS
SHOWN ARE IN INCHES.
HVI-2100 CERTIFIED RATINGS comply with new testing technologies and procedures prescribed by the Home Ventilating Institute, for
off-the-shelf products, as they are avaialable to consumers. Product performance is rated at 0.1 in. static pressure, based on tests conducted
in AMCA’s state-of-the-art test laboratory. Sones are a measure of humanly-perceived loudness, based on laboratory measurements.
* Where noted performance rating is not HVI certified but was established in accordance with HVI Standardized test procedure.
See next page for blower performances.
PRODUCT SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.