Installation Guide

- 17 -
INSTALL THE FILTERS
1. To install the grease fi lters, align rear fi lter
tabs with slots in the hood. Push latch tab
in, push fi lter into position and release.
Make sure fi lter is securely engaged after
installation. Fig. 26.
2. To remove the fi lters for cleaning, push
latch tab in to disengage fi lter from hood.
Tilt the fi lter downward and remove.
NOTE: Remove protective fi lm from fi lters and
steel surfaces before using cooking under
range hood.
FIG. 26
NON-DUCTED
RECIRCULATION FILTERS
INSTALLATION (NON-
DUCTED HOODS ONLY)
Non-ducted recirculation fi lters are included
with kit ANKCC3463. Replacement
non-ducted recirculation filters can be
purchased separately (AFCCC3463).
Kit and non-ducted recirculation fi lter are
optional for CC34IQ63SB only.
Position the non-ducted recirculation fi lter
over the grease filter and secure it by
means (4) wire retainers. Refer Figure 25.
FIG. 25