Installation Guide

- 6 -
PREPARE THE HOOD
Unpack hood and check contents.
You should receive:
1 - Range Hood Body
1 - Remote Control
6 - Grease Filters
6 - Lag Bolts, 6 x 70 mm
6 - Washers
6 LAG BOLTS
(6 x 70 mm)
FIG. 2
REMOTE
CONTROL
RANGE HOOD
BODY
6 GREASE
FILTERS
6 WASHERS
EXTERIOR OR IN-LINE
BLOWER SELECTION
The blower must be cULus Listed for
Canadian and U.S. use, and evaluated for
use with a solid-state speed control, rated
120V, 60Hz, 6.0A max.
CAUTION:Either an exterior blower or
an in-line blower may be used with this
range hood. The Model CC34E6SB range
hood must be installed only with Best
Exterior Blower Models EB6, EB9, EB12,
EB15 or Best In-Line Blower Models ILB3,
ILB6, ILB9 or ILB11.
Other blowers cannot be substituted.
(Blower sold separately).