Manual

- 12 -
INSTALL THE HOOD
!
CAUTION: Multiple installers are
recommended because of the large size and
weight of this range hood.
1. Adjust height of the telescoping support
frame and secure with screws and washers.
Fig.9.
!
CAUTION: Adjust the height before
installation.
2. Lift range hood into the ceiling opening.
3. Secure each support frame to the wooden
hood support frame using (6) 6 x 60 mm lag
bolts and washers provided. Fig. 10.
4. Install exterior or in-line blower by following
instructions provided with blower. Fig.11
5. Install ductwork and duct tape all joints to
ensure an air tight seal.
FIG.11
(6) WASHERS
& LAG BOLTS
2x4 WOOD
FRAME
FIG.10
10” ROUND
DUCT
FIG.9