User manual

Front View* Back View*
101 Startup
1
If you have a UT3K, UT4K or UT5K: Attach the stabilizer bracket to the back of the
UPS (see Appendix B).
2
Open the UPS’ front door by pulling the top of the door toward you (see Figure 1 to find
the door). Make sure that the keyswitch inside the front door is turned to “Off” (see
Figure 2).
3
If your UNITY/I has an input line cord and plug: Plug in the UPS. If the plug does not
match the wall outlet, have a qualified electrician install the proper wiring and outlet.
If your UNITY/I is hardwired (does not have an input line
cord and plug), an electrician should have installed the UPS. An
external bypass/AC disconnect switch should be mounted on the
wall nearby (see Figure 3). Turn the UPS AC LINE
DISCONNECT SWITCH to “ON” and the UPS BYPASS
SWITCH to “OFF.”
4
Output
Receptacles
(optional)
Front Panel
Lights,
Display,
and Keys
Front Door
(Keyswitch
and Serial
Number
Inside)
Serial Number
Main Output
Circuit Breaker
(some models)
Communication
Port
Line Cord
DC Port
Grounding
Terminal
Stabilizer
Bracket
Figure 2
Figure 3
Figure 1
E
N
G
L
I
S
H
* The drawings in Figure 1 show a UT3K, UT4K or UT5K. The UT8K is similar in appearance.