Owner’s Manual Introduction (Thanks / Warnings / Records) Features / Benefits Controls / Diagrams Initial Setup (Placement / Settings) Operations Maintenance LCD Reminders Disassemby / Assembly Cleaning Troubleshooting Consumer Information Specifications Warranty Information 3 4 5 7 8 8 9 11 12 13 13 13
Introduction Thanks Welcome to a better, healthier environment! The BLS12K is one of the most advanced air purification systems on the market today. Incorporating photo catalytic oxidation technology, high level negative ionization, safe levels of ozone, and electrostatic filtration, the BLS12K reduces particles and inactivates microbes providing a cleaner, healthier environment for you and your family. The BLS12K is designed to provide years of trouble-free service when properly maintained.
Features / Benefits The BLS12K is one of the most advanced and most versatile whole house air purification systems on the market today. Using four advanced technologies, the BLS12K helps to eliminate odors, smoke, pollen, dust, bacteria, mold, pet dander, viruses, and much more. Noticeable pollution is eliminated in as little as 15 minutes, and the most difficult pollution in as few as 24 hours.
Controls / Diagrams Page 5 Unit Exterior Control Panel Filter Assembly Ionization needle Unit Rear Front Grille Rear Cover Latch Power Adapter Plug Unit Front
Controls / Diagrams Continued Page 6 Unit Rear Filter Removed PCO Cell Purification Plate Purification Plate Power Connector PCO Cell Power Connector Power Cord Connector Remote Power Button 4 POWER Fan Control 3 FAN 2 Away Mode Toggle 1 AWAY MODE Control Panel Purifier Control PURIFICATION Purification level LED Power Button Away Mode Toggle Fan Control
Initial Setup Ideal Placement When selecting a place for the unit within the environment there are some things to keep in mind. Find a location in the room(s) as far away from the HVAC air return duct as possible, so that the purification produced by the unit is optimally circulated. Place the unit on top of a bookshelf, shelf, or mounting bracket as high as possible leaving twelve to twenty-four inches between the unit and the ceiling. Make sure that there is as much space as possible in front of the unit.
Operations & Maintenance Turning the Unit On Press the POWER BUTTON on the CONTROL PANEL or REMOTE to turn the unit on. Unit will initially be set to “PURIFCATION LEVEL 1” Controlling Fan Speed Fan speed can be controlled on both the machine’s CONTROL PANEL as well as with the REMOTE. Three speeds are available (Low, Medium, High) and are adjusted with the FAN UP/DOWN buttons.
Disassembly / Assembly Page 9 DISASSEMBLY: You will need a #1 PHILLIPS SCREWDRIVER. WARNING! Do not operate the unit unless the following are properly installed: PCO CELL, PURIFICATION PLATE, REAR FILTER ASSEMBLY (with all three pieces in place), and the REAR COVER. CAUTION! The unit should be powered off and the POWER CORD should be disconnected whenever cleaning/disassembling/reassembling/ servicing. 1. Turn the unit off. (See “CONTROLS”) 2.
Disassembly / Assembly Cont. Page 10 Assembly You will need a #1 PHILLIPS SCREWDRIVER. WARNING! Do not operate the unit unless the following are properly installed: PCO CELL, PURIFICATION PLATE, REAR FILTER ASSEMBLY (with all three pieces in place), and the REAR COVER. CAUTION! The unit should be powered off and the POWER CORD should be disconnected whenever cleaning/disassembling/reassembling/ servicing. 1.
Cleaning WARNING! Do not operate the unit unless the following are properly installed: PCO CELL, PURIFICATION PLATE, REAR FILTER ASSEMBLY (with all three pieces in place), and the REAR COVER. CAUTION! The unit should be powered off and the POWER CORD should be disconnected whenever cleaning/disassembling/reassembling/ servicing. Unit Exterior Wipe down the exterior with a damp cloth or use compressed air or a vacuum cleaner to remove dust.
Troubleshooting WARNING! Do not operate the unit unless the following are properly installed: PCO CELL, PURIFICATION PLATE, REAR FILTER ASSEMBLY (with all three pieces in place), and the REAR COVER. CAUTION! The unit should be powered off and the POWER CORD should be disconnected whenever cleaning/disassembling/reassembling/ servicing. Unit Fails to Turn On 1. Verify that the POWER PLUG is plugged into an operational wall outlet. 2. Ensure that the POWER CORD is properly connected to the POWER ADAPTER 3.
Consumer Info / Specs / Warranty Consumer Information Best Living Systems declines all responsibility for all damages arising from improper use of the unit or in case of tampering with the unit. Specifications Unit • Size: 6 3/4” high x 6 1/2” wide x 7” deep • Weight: 3 lb. • Coverage: Up to 1500ft² (139m²) * Power Cord • Fuyuang Switching Power Supply • Model: FY 1503000 • Input: 100-240VAC 50/60Hz 2.5A • Output: 15VDC 3A • See the power supply label for certifications and warnings.
Page 14 Copyright © 2011 Best Living Systems | All Rights Reserved
