User`s manual

DOCSIS 1.0 Cable Modem User Guide Rev. 3.0 13
10. Type command and click ok
11. Type ipconfig and press Enter
12. Type ipconfig /renew_all if you don’t receive an IP address
Using USB with the Windows 2000 Operating System
To use the USB port with Windows 2000:
1. Connect USB cable from PC to Cable Modem
2. Connect RF cable and power on Cable Modem. Wait until Cable
Modem registers and LINK LED lights steadily, it will take from
40 sec to 4 min depending on Network traffic
3. Cable Modem may reboot if you have previously connected it
through Ethernet port
4. Windows will prompt new hardware found
5. Insert the Driver CD-ROM