Specifications

CM-X300 CoM
8 CM-X300 Reference Guide Rev 1.31 30-Dec-2010
Revision Information
Date
Description
September 01, 2008
Preliminary release
October 29, 2008
CM-X300 rev 1.1 release
November 30, 2008
Added section 3.3.19, PWM Controller.
December 01, 2008
Added section 3.3.8.1, Limitations of Display Controller Capabilities.
December 14, 2008
Added section 3.3.4.2, Implementing Magnetics
March 17, 2009
CM-X300 Revision 1.2 introduced
Block Diagram (Figure 1) updated
Section 2.2 CM-X300 Features updated
Section 3.3.8.1 Limitations of Display Controller Capabilities updated
with the PXA300 block diagram
Section 3.3.18 Synchronous Serial Port (SSP) updated: SSP3 port added.
Antenna disconnection instructions added to the sections 3.3.2 Wireless
LAN and 3.3.3 Bluetooth
Section 3.3.7 Keypad updated.
June 16, 2009
Note about LB-CS0 usage added
CAMI connectors pin functions updated (keypad)
Active power consumption data updated in the features table (1.5W max)
Standby power consumption data updated in the features table (50mW)
Added the chapter 6, Power Consumption, on page 52
October 12, 2009
PWM1 output added.
November 15, 2009
GPIO pins DC characteristics added
November 22, 2009
Formatting errors fixed
December 20, 2009
CIF GPIO info added
February 02, 2010
USB chapter revised
February 16, 2010
Standoff info updated
March 02, 2010
Note about CIF availability added
GPIO80..82 usage note added
FFUART availability on C624M note added
PWM1-OUT/GPIO18 pull-up/down note added
May 26, 2010
USB2 port functionality in C624M configuration updated
GPIO availability table updated
Dec 20, 2010
Battery option ―B‖ added to table 4
Updated tables 5, 39 and 40.
Updated chapter 3.3.15
Please check for a newer revision of this manual at CompuLab's web site –
http://www.compulab.co.il/. Compare the revision notes of the updated manual from the web site
with those of the printed or electronic form version you have.